How to Wire a Sadelta EC-2000
- 1). Open the hood on the vehicle you will be mounting the CB in, and remove the negative battery cable with the adjustable wrench.
- 2). Use a screwdriver to mount the Sadelta to the mounting brackets that come with the unit.
- 3). Run the red power wire from the CB to the fuse panel on the vehicle. Use a wire stripper to strip about 1 inch of plastic sheathing off the wire. Insert the wire into an auxiliary output slot on the fuse box. Connect the black wire from the CB to a ground surface, like the vehicle's chassis.
- 4). Connect the antenna wire onto the antenna jack -- plugging it in by hand.
- 5). Reconnect the vehicle's negative battery cable with the adjustable wrench.