How to Change the Water Line Inside the Refrigerator Door
- 1). Close the water supply line at the shut-off valve underneath the kitchen sink. Press down on the water dispenser lever to drain any remaining water from the line.
- 2). Unplug the refrigerator from the wall.
- 3). Pull back on the door seal and loosen the nuts holding the door seal in place, using the nut driver.
- 4). Remove the screws holding the plastic back panel of the freezer door in place. If the screws are covered by plastic tabs, pull up on the tabs. Remove the back panel from the freezer door.
- 5). Loosen the nuts from each side of the water line and remove it from the dispenser.
- 6). Place the coupling nut of the new water line onto the water inlet valve and screw it on with the wrench. Place the other coupling nut onto the water supply line and tighten.
- 7). Reassemble the fridge and test the unit.