How to Install a Seals Kayak Cover
- 1). Spread the cover over the cockpit combing, which is the ridge surrounding the cockpit. Keep the flat colored side up and the plastic sheen side down into the cockpit.
- 2). Push the bungee cord sewn into the outer edge of the cockpit cover around the back side combing on the cockpit.
- 3). Grip the nylon loop at the front of the cockpit cover and pull it forward, then over the front lip of the combing on the cockpit.
- 4). Pull the bungee cord over the combing edge around all the sides, making a watertight seal back-to-front and all points in between. Make sure that you don't tuck the front nylon loop into the cockpit cover as you pull the cord forward.