Instructions on the Use of a Dent Puller
- 1). Moisten the metal surface of the dent. Apply the suction cup over the deepest part of the dent.
- 2). Pull the suction cup steadily away from the dent. The metal around the cup might raise when pulling the suction cup, hampering the effectiveness of the tool. Place a small piece of cardboard over the raised areas around the suction cup; tap the framing hammer against the cardboard. The hammer forces the raised areas down, and often pops out the center of the dent. The cardboard protects the car from the hammer.
- 3). Hammer, sand and paint any blemishes that occurred as a result of the dent. Place the cardboard between the car and the hammer.