How to Convert a Solid State Integrated Amp to a Guitar Amp
- 1). Turn the amplifier off and the volume on the guitar and the amplifier down. Plug the guitar cable into the female side of the mono female / RCA male adaptor.
- 2). Plug the male RCA side of the adapter plug into the RCA mono female-to-RCA dual male Y-adapter.
- 3). Plug the RCA males of the mono female RCA/dual RCA male adaptor cable (the Y adapter) into the AUX input of the amp and switch the amp to AUX input.
- 4). Turn up the volume on the guitar, if it has a volume control. Turn on the amplifier and inch up the volume while strumming the guitar.
- 5). Connect pedals and effects boxes to the amp with adapter plugs and Y-adapter cables. Both channels of the tape monitor output run through a mono adapter into the effects box or pedal. The box's output re-splits into stereo RCA plugs re-entering the amp at the tape monitor in. Depress the tape monitor switch to add effects to the loop.