Aeroquip Crimp Specifications
- Assembling a hydraulic hose can be a daunting and tiring task if you lack a suitable crimper. Aeroquip crimping machines are designed to provide you with quick and accurate crimping when assembling your hose. They are easy to operate and come in various designs for your hose assembly needs. They are not only hydraulic compatible but also electronically controlled, making them ideal for hydraulic hose repairs.
- The ProCrimp 1370 crimper measures 13 inches wide, 14 inches long and 24 inches high. It weighs 85 lbs. Its pump requirement has a minimum reservoir capacity of 40 cubic inches (656 cc) and a pressure rating of 10,000 psi (690 bar); therefore, you can power it by any kind of 10,000 PSI hydraulic power source. According to Aeroquip, the ProCrimp 1370 portable crimp machine is suitable where faster and on-site hydraulic hose repair is required. It is MatchMate Plus compatible and uses quick-change die cages. Its diameter is controlled by shims. However, you cannot crimp barrel and flat field crimp fittings, internal skive fittings and flat single skive fittings.
- This crimper measures 12.75 inches wide, 25.75 inches long and 28.50 inches high. It weighs 238 lbs. According to HoseXpress, the ProCrimp 1380 is capable of crimping all hoses up to -20 SAE 100R12 hose styles including the MatchMate Plus hose and fittings program. However, you cannot crimp internal skive fittings and hoses that need positive stops to crimp. It is electronically controlled, which makes it faster and accurate in crimping. Its electronically set keypad has 10 programmable settings, making it easy to adjust when assembling a hose. It has a preset crimp and easy to use die cage insertion which essentially minimizes errors and reduces setup time. Its upright design provides you with an easy insertion of the hose, while its compact size makes easier to carry and store.
- The Aeroquip ProCrimp 1390 Crimp Machine measures 29 inches wide, 28 inches long and 49 inches high. It weighs 825 lbs., and this crimper can crimp through the cover, capable of single skive as well as internal skive fittings ranging from a 3/16-inch I.D. hose through to a 2-inch I.D. hose. It has a 10,000 PSI hydraulics which is electronically controlled, making it accurate, fast and quiet when you use it in hose assembly. It has a front-end loading design and electronic keypad which controls the diameter of the crimp. This crimper has a power return stroke, a backstop fitting locator and a die cage operated crimp as reported by Dunham Rubber & Belting Corporation.