How to Install Additional Ports With a Qwest DSL Actiontec M1000 Modem
- 1). Locate the silver tab on the V2000 DSL router expansion module next to the slot in the middle of the V2000.
- 2). Place your thumb on the silver tab and move and hold the tab in the direction of the arrow located on the tab, which is away from the slot.
- 3). Place the bottom of the Actiontec M1000 DSL router into the slot in the middle of the V2000, so the 8-pin network port on the back of the M1000 is in line with the 8-pin network connector in the slot.
- 4). Place your hand on the front of the M1000 and push the M1000 toward the 8-pin network connector in the V2000 slot until the connector snaps into the network port.
- 5). Release the silver tab to secure the M1000.