How to Make an Airsoft RPG
- 1). Place a sheet of newspaper on a table. Place a metal skewer horizontally on the newspaper. Place another metal skewer above the first one, with the ends lining up.
- 2). Cut a one-inch piece of solid-core copper wire with the wire cutters. Solder one end of the copper wire to the left end of one of the metal skewers. Let the solder cool for a minute.
- 3). Solder the other end of the copper wire to the left end of the other metal skewer. Let the solder cool for a minute. Tape the other ends of the metal skewers together with a piece of duct tape. The rocket for your RPG is now ready.
- 4). Unscrew the top barrel from the toy shotgun. Turn the toy shotgun over. Apply bonding glue to the side of the bottom barrel that is now facing up.
- 5). Line up the ends of the PVC pipe with the bottom barrel. Place the PVC pipe onto the bottom barrel. Let the bonding glue set for three hours.
- 6). Hold the airsoft-type RPG gun you have made. Rotate the bottom barrel to the top. Insert the free ends of the metal skewer into the end of the PVC pipe farthest from you.
- 7). Go outside in your backyard. Cock the firing chamber 10-15 times. Rotate the barrel to bring the PVC pipe up to the top.
- 8). Aim your airsoft-type RPG gun at a tree or rock. Press the trigger to discharge the piston that powers the compressed air firing out of the barrel. Watch as your rocket files out from your airsoft-type RPG gun and at the tree or rock.