How to Use Sod Lifters
- 1). Mark a section a sod 12 to 18 inches wide and 2 to 4 feet long.
- 2). Hammer in stakes at each corner of the strip of sod.
- 3). Tie a string to one of the stakes and run it around the other stakes to outline the sod strip.
- 4). Cut 2 to 3 inches straight down just beneath the string using the straight-edge spade. Cut all the way around the strip by stepping down on the top of the blade with hard-heeled boots.
- 5). Put on a pair of gloves to protect your hands from blisters and insert the sod lifter to beneath the sod at one end of the strip. Push the blade into the soil to cut the sod from the ground. Move it from side-to-side with your hands and arms and kick on the backside of it with the heel of your boot.
- 6). Roll the sod like a carpet as it begins to separate from the earth. Continue cutting, lifting and rolling until the entire strip comes free.