Bose Wb-3 Brackets Instructions
- 1). Remove the sticker cover from the rubber spacers that come with the brackets. Attach a spacer to the lower center rear of each speaker.
- 2). Drill a hole 7 cm from the top edge of the back of the each speaker and 15 cm from the left side of the speaker. Drill another hole 7 cm from the top edge of the back of each speaker and 15 cm from the right side of the speaker. Take care not to drill all the way through to the open speaker compartment as this will ruin the sound quality of the speaker.
- 3). Attach the hanging bracket section to the rear of the speaker. Align the bracket holes over the drilled holes in the speaker, with the hanging attachment at the top. Secure the bracket to the speaker using the supplied Phillips screws. Perform the same procedure on the other speaker.
- 4). Hold a spirit level on the area of the wall where you wish to mount the speaker. Making sure the alignment is level, hold the wall mounting section of the bracket to the wall and mark the holes to be drilled with a pencil. Do the same for the other wall mounting area.
- 5). Drill the marked holes 10 mm deep. Insert the provided wall plugs.
- 6). Attach the wall mounting bracket section to the wall with the provided screws.
- 7). Attach the speaker section and the wall section together by hanging the speaker part on the wall section.