Wood to Glass

• 1). Clean the direct areas you want to glue together. To clean the surface of the glass, use your preferred glass cleaner, and dry with newspaper. Old newspaper works well when you don't want to leave streaks. For the wood, scrub lightly with a scrub brush. You may need wood cleaner if there is a lot of dirt on it. Make sure the areas that will be glued together are completely clean.
  
  
• 2). The exact method for gluing the two together will vary depending on what you're gluing. In general, you will want to evenly distribute your adhesive to one material. If one is stationary and not easily moved, you should spread the adhesive you're using to the stationary object and press the more easily moved one to the area with adhesive.
  
  Depending on the situation, you may need to find something that will hold the two pieces together until they are stuck. This can often be done with rope or straps, but if there is a lot of mass hanging in mid-air, you should also put something. underneath to support the weight. This will also vary depending on the situation, but a slab of wood, or a table that is sturdy enough to support the weight will work. The time it takes will vary depending on which adhesive you use.
  
  
• 3). Use an X-acto knife to clear away any excess adhesive. You can generally cut away adhesive that was squeezed outside of the area you wanted to glue.