How to Regrout Kitchen Tile
- 1). Clean existing grout. You want to remove all of the dirt and grime from your grout before you attempt to remove it. You do not want mildew or other dirt and contaminants to get into the spaces between the tiles when you remove the grout, so working with a clean surface is essential.
- 2). Remove existing grout. You can either remove all of the grout, or just the damaged or dirty portions, depending on what your preferences are. A grout saw is the best tool to remove grout. This saw doesn't actually cut the grout out, but is instead rubbed over the area where the grout is. As you rub the grout saw over the grout, the hard, jagged surface of the saw will break up the grout for removal. Make sure you get rid of all the grout, otherwise it can ruin the appearance of the new grout you apply. You should apply a wet rag when you are finished with the grout saw to make sure all the tiny pieces are gone and ensure that they do not taint your finished product.
- 3). Mix your new grout. The grout you purchase from the home improvement store will need to be mixed with water and/or adhesive. The specific instructions for mixing grout vary depending on type, style and manufacturer of the grout brand. The grout you purchase will come with mixing instructions, so make sure you follow these carefully.
- 4). Apply your new grout using a grout float. This is an inexpensive tool sold in improvement stores that allows you to spread the grout evenly. You want to apply the grout over the space between the tiles and use the grout flout to get an even amount in that space. The surface of the tile and grout should be smooth when you are finished. You can run a rag or your finger or a grout sponge over the area to eliminate excess and add more grout if certain areas are too low and uneven as a result.
- 5). Seal the grout. This step should be done using a grout sealer after the grout you applied dries. Sealers are available in home improvement stores and generally come premixed with its own applicator. Follow the instructions and use the applicator to apply the seal to your grout job.